Slide-Glide is a uniquely formulated lubricant that protects all firearms from corrosion and wear. It also softens “felt recoil” in all semi-auto’s, especially pistols.
Advantages over other oils and greases:
Slide-Glide provides a dramatic improvement in lubrication compared to conventional oils and greases such as lithium, or lithium-based metallic greases containing molybdenum or graphite.
Additionally, it is engineered to have a stringy characteristic that prevents “tracking” or shearing on sliding metal surfaces. It stays put – ceaselessly dragging itself back into the friction areas of the cycling slide and barrel.
It’s stringy characteristic keeps the grease between the moving parts – noticeably softening the felt recoil of semi-atuomatic pistols. Your pistol just feels “smoother” when you shoot it.
With three viscosities to choose from, there is a viscosity of Slide-Glide that will reduce wear and improve the operation of any firearm, tool, or machine.
And Slide-Glide isn’t just for semi-auto pistols. It slicks up revolver actions, pump and semi-automatic shotguns, semi-automatic, bolt and lever-action rifles, and even your Dillon reloading press.
youtube video on applying Slide-Glide (opens new window)
youtube Slide-Glide enorsement video (opens new window)
Note: I do not know the guy, John, that made both of the above videos (I learned about them from a customer on the phone).
Tub: $11.95 / Tube: $7.95
|Slide-Glide Lite, Standard, or Heavy?||Which Viscosity?|
|Slide-Glide is available in three viscosities, and in tubs (pictured) and tubes:
Slide-Glide Lite (thin viscosity)
If you only will buy one viscosity, the Lite is perfect for all firearms in all climates.
Slide-Glide Standard was originally blended for “stock-type” pistols in temperatures above 60 degrees. Its viscosity is a little too thick for compensated pistols, .22’s, and revolvers. Order
Slide-Glide Heavy’s viscosity is specifically blended for pistols with “loose top ends” (frame to slide fit). In temperatures above 80 degrees, it also works well in non-compensated, centerfire pistols. Order
For maximum protection from wear, Slide-Glide Lite is all you need. But for maximum recoil dampening – use the thickest viscosity that allows your pistol to function with 100% reliability in the temperature where you shoot.
Cary or Duty Pistols:
Polymer or Stainless Steel:
BEFORE you shoot with Slide-Glide in a competition: Test the viscosity and how much you apply in the temperature where you will shoot!
|Cleaning & Application||Which Viscosity?|
|Before first application: Thoroughly clean and dry your firearm.
Re-applying Slide-Glide: Wipe off the old Slide-Glide with a paper towel. Finish by thoroughly wiping with a shop towel, forcing the towel into sharp corners with a small screwdriver or stiff brush.Using a “dedicated brush” (Super-cheap brushes are available on BrianEnos.com, the tip of which is showing below), apply liberal amounts of Slide-Glide to both sides of every contact area in the top end. This includes the top and bottom locking lugs on the barrel, the frame and slide rails, the bushing or cone area, and especially the upper locking lugs on the inside of the slide. Don’t forget the recoil spring, guide rod, and the inside of the reverse plug. Basically, apply where anything touches anything else – except the firing pin and stop area. Assemble the pistol, cycle, and wipe off excess. After a little experience with the dedicated brush, you will apply just the right amount.I received an unsolicited call from Darwin Nercesian, who emphatically exclaimed – “You gotta be out of your mind not to be using this stuff.” So there you have it. youtube video on applying Slide-Glide (opens new window)
Apply it just about anywhere you need the finest grease available.
(Except for human body parts, of course.)Used and endorsed by Rob Leatham… who also especially endorses the flashing Monty Python arrows.Note: The AR-15 cleaning brush pictured at right doesn’t work quite as well as BrianEnos.com’s Super-cheap brush. And thanks to Freddy Craig for the term “dedicated toothbrush.”
|Will Slide-Glide attract dust or dirt?||Which Viscosity?|
|That’s a common question, and one I can answer from a layman’s perspective.
I prefer shooting guns to cleaning them. When training (Shooting Bio), I would shoot 3000+ rounds (often 5000+) between cleanings, and never observed any excess wear in the top end. In fact, once a new gun “settles in,” it does not seem to wear any more at all.
When I first started testing the Glide, I wondered about the “dust factor.” But after shooting tens of thousands of rounds through the same pistols lubed with the Glide – in the dusty Arizona desert – and not detecting hardly any wear at all – I stopped worrying about it.
Here’s my layman’s theory: The key word is “insulates.” The Glide insulates everything it touches – including dust or dirt. So if there are any dirt particles in the grease, the Glide insulates them from contacting the gun. I’m not an engineer, so I know that’s not very scientific. It’s just my theory based on what I have observed over a long period of time.
From the Hodgdon Powder Company: Most unburned powder residues that may become visible in the grease are actually lubricating in nature (graphite), and will not adversely affect the performance of the grease. (I was sponsored by Hodgdon for several years during my professional career.)
|How it began…||Which Viscosity?|
|Initially, my inspiration to develop the Glide came from an overall dissatisfaction with available oils and greases. One day, instead of the usual oil, I lubricated the “top end” (barrel, slide, frame rails, and recoil spring assembly) of my .45 with “White Grease.” It sure felt slick when I cycled the slide… and when I took it to the range, for the first few shots – the gun definitely felt like it “kicked softer.” But after a couple of magazines of ammo, it felt just like it used to when lubricated with oil. I took the slide off, examined the top end, and discovered all the grease had been pushed into the tolerances of the barrel and slide. Well, so much for White Grease. But it got me thinking, so I called an old friend and shooting acquaintance, who happened to be a lubrication engineer for General Motors.
My first criteria were that the grease stayed where you put it. From the softer felt recoil I noticed when I first tried the White Grease, I knew if the grease would stay in the friction areas, the pistol would feel softer all the time. For felt recoil reduction, after testing with various viscosities, I realized the viscosity was critical: It should be heavy enough so the pistol felt as soft as possible, but not too heavy so as to cause malfunctions. After about a year of testing in my stock-type competition pistols, I was 100% satisfied with it, and decided to call it Slide-Glide Standard.
I also had a couple pistols with excessively loose top ends. (150,000+ rounds of non-Glide lubrication.) Thinking a thicker viscosity would improve the softening effect on recoil, I experimented and developed a blend that was noticeably thicker than the standard viscosity. I called it Slide-Glide Heavy
After selling Slide-Glide Standard and Heavy for a few years, I started getting requests to make a lighter viscosity that would allow a compensated, IPSC “Open gun” (cycles with a slower slide velocity than a stock-type pistol) to function reliably, even in colder weather. So I blended a version that was quite a bit thinner in viscosity than #1, and sent samples for competitors to test in their Open guns. When all the reports came back thumbs up – we had Slide-Glide Lite.
Unsolicited Performance/Protection From Wear Endorsement:
Unsolicited Endorsements Posted on Other Forums:
Slide-Glide and corrosion protection (opens in a new window)
Unsolicited Performance Endorsement:
I picked up some Slide-Glide Lite off the table at the Bay Area Rifle Championship a week ago. (Oh, and thanks for your sponsorship of the match also.) After shooting Revolver for 6 years and achieving Grand Master class, I decided to cross over to 3-Gun.
Tired of oil dripping off and out of everywhere on my shotgun and AR-15, I took the advice of a fellow 3-gunner and lubed everything with Slide-Glide. No mess outside. It stays in place. And is slick as hell.
Had a chance to shoot 3-Gun last weekend with Mike Voigt and Taran Butler in Piru, thus using it for the first time. Everything ran like clock work. And with not having oil splattered everywhere, my guns were cleaner at the end of day. Couldn’t ask for a more perfect gun lube.
Unsolicited Performance Endorsement:
Unsolicited Reliability Endorsement:
Fast forward to December 2007. I bought all three viscosities of Slide-Glide, but primarily it was purchased to use Slide-Glide Heavy in my Glock that I shoot in local USPSA matches. I was also going to try Slide-Glide Lite in my new Pardini. It worked great in both guns.
Thanks for a great product.
Unsolicited Reliability Endorsement:
Unsolicited “Sand Endorsement”:
Experience with Slide-Glide:
I shoot an XD9. I was recently at a class outside of Laughlin, NV — grit, dirt, sand, various reptile-type varmints, more grit, dirt & sand. One of the range sessions was a ‘combattives’ class which involved falling down – gun-side down – into that grit/dirt/sand.
The Slide-Glide worked beautifully! Everyone said to use one of those ‘dry lubes’, ‘like they use over in The Sandbox’. What I found was that the Slide-Glide trapped a lot of the grit, wiped off easily leaving a fine lubricant film so that I could shoot for the rest of the day. The areas that had Slide-Glide on them were actually easier to clean than the other parts of the gun that didn’t have grit particles but had a very fine layer of dust that electrostatically stuck to EVERYTHING — plastic & metal.
Even if my gunsmith prefers dry lube & ‘Militek’, I like the Slide-Glide!
Dr Fran Terry
I cleaned three 1911’s, lubed one with grease, the 2nd with oil and the 3rd with Slide-Glide Standard. With just playing with the guns, the greased ones stay sticky and the oiled one is getting dry.
|Note: There’s no reason for this pic on this page – I added it just for fun.
Thanks to Mark Twight for the original shots and Richard Salem for the Bryce 3D mods.